moore_logo
Receiver Gauges
Moore Products pressure range is 3-15 PSIG; . Stud on rear for panel mounting with "U"clamp (not provided) Used for set-point and output to pneumatic controllers. Accuracy .25% F.S. These gauges use a Niafram bellows for accuracy.

Moore Products Co was purchased by Siemens several years ago and these gauges are no longer supple. The gauges on this shop are ether new old stock or good used.  We can make a new dial for additional charge. The case is 1.8 inch deep.  Gauges shown here are in stock

!

Receiver Gauge, Duplex Pointer, 3.5" Dial 0-100%

Dial scale is 0-100%, Moore Products Part Number 3189-7

Gauge dimensions and connection information click here

A new dial was made for some of these gages and calibration has been done. Dial scale is 0-100 Lin pressure range is 3-15 PSIG; Connections: 5/16 UNF back connections (see below for adapters or purchase operational plastic barbed fitting. The Gauge can be panel mounted with U clamp, NOT included, Also Available are 5x5" panel mounting bracket NOT included, see below. Special gauge dials can be made, See below, you must provide sample dial unless we have template, If you need a new dial call us for available stock templates and if we have the one you require order the gauge with option for installing new scale below. If we do not have a template, you must provide one (Good Photo or old dial) and order New Dial Setup Charge below (One time)

:   lbs

New Dial SETUP Charge

Whether it be one or more, there is a one time charge to make a template for the scale you desire if we do not have a template:

Existing templates in stock are: 0-100 Lin & 0-80 Lin

Receiver Gauge, Single Pointer, 3.5" Dial 100% new

Dial scale is 0-100, Part No. 3189-2

Unit is USED, sold as is, for an optional charge we will check calibration to determine if it is within accuracy. This Is deep case 1.8 inch. If you need a new dial call us for available stock templates and if we have the one you require order the gauge with option for installing new scale below. If we do not have a template, you must provide one (Good Photo or old dial) and order New Dial Setup Charge above (One time)

Gauge dimensions and connection information click here

:   lbs

Receiver Gauge, Single Pointer, 3.5" Dial Panel Mounting New

10600-7 Receiver Gauge  3-15 PSIG 0-100 dial only

This is a new ECONOMY gauge with panel mounting brackets, Range: 3-15 PSIG, Dial 0-100, 1/4" MNPT center Back Connection, accuracy is 1/2% Full Scale. This Is Shallow case 1 inch

Gauge dimensions and connection information click here

:   lbs