HIK
Mini-Loading Station replacement

Replacement for Moore Products 522K (2) gauges & 512K (1) Gauge Mini-Loading Station.  TRUtegra has been sold the rights to mfr and sell these units as of March 2016

 

The Mini-Loading Stations  provide a 3-15 psiq output. Model HIK-522 has 2 gauges with red pointers, the left one indicates the station's output and the right pointer displays any independent, 3-15 psiq, input signal.

All stations have 1.5 inch (38 mm) 3-15 psi,q vertical receiver gauges. The standard gauge scales provided, unless otherwise specified, are 0-100 linear. Other scales are available on special order.

The stations have a 2" x 6" panel front and fit a panel cutout of approximately 1 7/8" x 5 7/8". They can be mounted singly or in a row up to six stations with use of a optional 3/4" (19 mm) wide, 10 Ga. steel mounting bar that replaces the standard mounting brackets provided.

The standard nameplates are etched aluminum as shown and have been designed for operation of a control valve: 0 psig = "C" Closed; 15 psig = "O" Open; V/P "valve/position, custom nameplates can be provided, please call or email us requirements.

MOUNTING CONSIDERATIONS

The stations can be mounted up to 50° off vertical (tilt back).

The stations can be used at ambient temperatures between -40°F and +180°F. However, if the temperature is expected to exceed 110°F, tubing clips should be ordered for the station's flexible PVC tubing.

TRUtegra has been sold the rights to mfr and sell these units as of March 2016

DELIVERY: 30-45 days

 

!

HIK-512

Mini 2X6 Manual Loading Station with (1) gauge for valve output pressure and regulator for adjusting same

Allow 45 days for shipment

Instruction Manual

:   lbs

HIK-522

Mini 2X6 Manual Loading Station with (2) gauge for valve output pressure and regulator for adjusting same and a gauge for indicating a remote pressure signal

Allow 45 days for shipment

Instruction Manual

:   lbs